VIGGO · Cleaning

VIGGO SC80 Pro

Powerful scrubbing robot for large indoor and outdoor areas

efficiency
4,000 m²/h
scrubbing width
800 mm
clean water
140 l
washing
6–8 h

Free on-site trial and return-on-investment calculation.

Calculate your savings with the ROI calculator

About the model

The SC80 series is designed for transport hubs, shopping centres, underground car parks, industrial and warehouse spaces and sports halls of 10,000–20,000 m². The SC80 Pro has increased floor pressure for heavily soiled surfaces, for example where forklifts operate; the SC80 Garage adds light and voice warning modules.

  • Up to 4,000 m²/h and 140 l of clean water
  • Floor washing, sweeping and dust mopping
  • 3D and 2D lidar, 4 RGBD cameras, 8 ultrasonic radars
  • Docking station for automatic charging and water exchange

Specifications

Technical data

Variants

VariantSC80SC80 GarageSC80 Pro
Application environmentlarge and medium-sized indoor and outdoor spaces of 10,000–20,000 m² where the site changes frequentlyspaces with heavy pedestrian and vehicle traffic, 10,000–20,000 m², indoor and outdooras SC80, including sites with forklifts and heavily soiled surfaces
Functionalitystandard versionadded warning modules: front and strobe lights and voice alertsincreased floor pressure, contour and strobe lights for heavily soiled surfaces

Common technical specifications

General
Dimensions (L × W × H)1,340 × 1,024 × 1,350 mm
Total weight400 kg
Cleaning modefloor washing, floor sweeping, dust mopping
Roller brush pressuremaximum 35 kg vertical pressure
Suitable surfacestiles, epoxy, terrazzo, marble, paved areas, diamond grit, concrete
Performance
Cleaning width1,160 mm
Scrubbing width800 mm
Efficiency4,000 m²/h
Clean water tank140 l
Waste water tank170 l
Bin capacity1.5 l
Operating noise≤ 70 dB
Battery
Battery36 V / 200 Ah
Charging time4–4.5 h
Runtimewashing 6–8 h; dust mopping 10–12 h
Movement and sensors
Minimum passage width1,300 mm
Minimum turning radius720 mm
Gradient10° (unloaded)
Maximum speed1.4 m/s
Vertical obstacle height2.5 cm
Sensors1 × 3D lidar, 1 × 2D lidar, 4 × RGBD, 8 × ultrasonic radar, collision sensor, IMU, wheel speed sensor

WSC80 docking station

Dimensions (L × W × H)510 × 480 × 950 mm
Net weight55 kg
Input voltage110–220 V (45–60 Hz)
Input current≤ 10 A
Output voltage25.6–46 V
Maximum charging current40 ± 0.5 A
Rated / maximum power1.44 kW / 1.84 kW
Water inlet flow8–11 l/min
Water drain flow4–7 l/min

Manufacturer data. We reserve the right to make changes without prior notice.

Try VIGGO SC80 Pro in your space.

We arrange an on-site trial and a return-on-investment calculation for your building.

Send an enquiry
Enquiry: VIGGO SC80 Pro